11-23-2010 10:50 AM - edited 03-06-2019 02:11 PM
I was checking out the supervisor engines ( http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/module/guide/01overvw.html#wp1070862 ) and could not tell what the differences are from one to the other. I have 2 4506s with sup IV engines. Is there a benefit to chaning sup engines? I also have a 4510 R with a SUP V. Thanks in advance.
Solved! Go to Solution.
11-23-2010 11:21 AM
Hi,
Check the data sheet, hope this can help you.
http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_models_comparison.html
Regards,
Lei Tian
11-23-2010 11:21 AM
Hi,
Check the data sheet, hope this can help you.
http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_models_comparison.html
Regards,
Lei Tian
11-24-2010 06:12 AM
Thanks Much!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide