Switch 3550 - snmp

[crdusainc]

Hello people, we are running a 3550 in no switchport (routing mode), assigning a different ip addreses to different ports, with that we want to know if possible to read with a snmp client the traffic on that IP/Port, somebody can help with that?

thanks in advance!

[crdusainc]

Trying to be more specific...

We got this type of config...

.

.

interface FastEthernet0/22

description OF1

no switchport

bandwidth 25000

ip address 199.xxx.xxx.xxx 255.255.255.248

speed 100

duplex full

!

interface FastEthernet0/23

description OF

no switchport

ip address 199.xxx.xxx.xxx 255.255.255.224

duplex full

!

interface FastEthernet0/24

description EN

no switchport

ip address 199.xxx.xxx.xxx 255.255.255.252

speed 100

duplex full

!

interface GigabitEthernet0/1

switchport mode dynamic desirable

!

interface GigabitEthernet0/2

switchport mode dynamic desirable

!

interface Vlan1

no ip address

!

interface Vlan2

no ip address

!

interface Vlan33

no ip address

!

ip default-gateway 199.xxx.xxx.xxx

ip classless

ip route 0.0.0.0 0.0.0.0 199.xxx.xxx.xxx

ip http server

!

snmp-server community sunny RO

snmp-server manager

alias exec s show ip int br

alias exec sr show run

alias exec c conf t

!

AND ... we want to read SNMP on port (0/22  Individually) (0/23 individually) and the (general port 0/24...who is conected to our ISP router)...

Thanks!