12-07-2015 09:25 AM - edited 03-08-2019 02:59 AM
Hi,
I have a 3850 switch (running 03.03.05SE) operating as WLC but it doesn´t take any configuration related to a SSID.
After a power failure it set the SSID to default configuration and I can´t reconfigure it (web or CLI).
I tried to create a new wlan but it didn´t work too.
Thanks.
Solved! Go to Solution.
12-10-2015 03:21 AM
Hey Mate,
I hit this bug 2 weeks ago on my 3850 stack running version 3.6.3.
Below you can find the answer from TAC engineer:
This is a known issue and the following bug filed:
CSCus85866
Invalid Wlan configuration error when trying to change AKM to PSK
<B>Symptom:</B>
Error when attempting to change AKM to PSK, in wlan configuration.
% switch-2:wcm:Invalid WLAN configuration. Either dot1x or psk
authentication must be configured under wpa
<B>Workaround:</B>
Reset appliance to defaults or configure passwd key obfuscate
Seems that the bug details are not public available that's why don't have sufficient permissions.
Regards
Christos
12-07-2015 11:14 AM
Pls share the CLI configuration related to this WLAN configs.
I am running 3.6.3E code in my production and did not encounter this sort of issues.
HTH
Rasika
12-08-2015 09:57 AM
Hi Rasika,
Current config:
wlan pfr-WLAN 1 WLAN
client vlan wireless
no security wpa akm dot1x
session-timeout 1800
shutdown
After applying the following commands, wlan config doesn´t change.
security wpa wpa2 ciphers aes
security wpa akm psk set-key ascii 0 test798$
no shutdown
% switch-1:wcm:Invalid WLAN configuration. Either dot1x or psk authentication must be configured under wpa.
Thanks.
12-09-2015 04:29 AM
Hi,
It's a known issue, bug CSCus85866.You need to configure key obfuscate or reset your switches to defaults.
conf t
passwd key obfuscate
Regards
Christos
12-09-2015 02:43 PM
Hi Chris,
Could you share the bug details, I cannot see it due to permission restrictions, what codes affected. I did not have this on 3.6.x codes which I deployed.
HTH
Rasika
12-10-2015 03:21 AM
Hey Mate,
I hit this bug 2 weeks ago on my 3850 stack running version 3.6.3.
Below you can find the answer from TAC engineer:
This is a known issue and the following bug filed:
CSCus85866
Invalid Wlan configuration error when trying to change AKM to PSK
<B>Symptom:</B>
Error when attempting to change AKM to PSK, in wlan configuration.
% switch-2:wcm:Invalid WLAN configuration. Either dot1x or psk
authentication must be configured under wpa
<B>Workaround:</B>
Reset appliance to defaults or configure passwd key obfuscate
Seems that the bug details are not public available that's why don't have sufficient permissions.
Regards
Christos
12-10-2015 11:41 AM
Thanks for sharing this info chris.
12-11-2015 06:31 AM
Hey Chris,
Thanks for this information.
The key obfuscate configuration didn't work for me.
Regards.
04-25-2016 06:59 AM
Hello Christos,
"passwd key obfuscate" on code 03.06.04.E worked for me.
Thank You very much.
Regards,
Ravi...
12-09-2015 02:50 PM
Hi
What code version you running ?
3850-1(config-wlan)#security wpa 3850-1(config-wlan)#security wpa wpa2 ciphers aes 3850-1(config-wlan)#no security wpa akm dot1x 3850-1(config-wlan)#security wpa akm psk set-key ascii 0 Cisco123
Did you try above ? Note that additional "security wpa" line that was not there in your config. Here is my reference
http://mrncciew.com/2013/12/04/wlan-config-in-3850-part-1/
HTH
Rasika
12-10-2015 06:40 AM
Hi,
I'm running 3.3.5SE.
I tried all commands above but there is no change.
Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: