Switch connected to switch

[townofnewmarket]

Cisco Call Manager setup.

Cisco 3560-G has the call manager and Unity.  Off of this (one of the fiber GBIC ports) is a 3560 switch.  What I need to do is hang another 3560 off of this second 3560 and run a couple of phones off of it (I may get one of the smaller 8 port 3560s for this).  Do you see any problems with this?

Thanks.

[John Blakley]

No problems. I have a site that have several 3560s that run fine. As long as you're passing your vlans correctly, everything should be good.

HTH,

John

[Jon Marshall]

townofnewmarket wrote:
Cisco Call Manager setup.
Cisco 3560-G has the call manager and Unity.  Off of this (one of the fiber GBIC ports) is a 3560 switch.  What I need to do is hang another 3560 off of this second 3560 and run a couple of phones off of it (I may get one of the smaller 8 port 3560s for this).  Do you see any problems with this?
Thanks.

No you should be fine if you daisy chain the switches. It's not best pratice in terms of design generally but there shouldn't be a problem. I'm assuming it will look something liek -

Call manager -> 3560G -> 3560 -> 3560

Jon