11-21-2018 07:39 AM - edited 03-08-2019 04:39 PM
Guys,
Can someone recommend me the Switch model which i can use at access layer to support 10G connectivity for my Server.
11-21-2018 07:42 AM - edited 11-21-2018 07:43 AM
HI there,
A 3850 with a C3850-NM-2-10G o C3850-NM-4-10G module.
If you want the NM-4-10G you need to pick a 48-port 3850.
cheers,
Seb.
11-21-2018 07:56 AM
Any other model apart from 3850 Series as 3850 is quite expensive for my customer.
11-21-2018 08:00 AM - edited 11-21-2018 08:00 AM
OK, the 2960X can support up to two SFP+ interfaces per chassis:
..or perhaps cheaper is a SG350X which on some models has up to four SFP+ interfaces:
cheers,
Seb.
11-21-2018 07:59 AM
This depends on the whole requirement: one 10G server or a lot of them, in a Data Centre or a small office. Generally, aggregation of 10G servers works well on Nexus 93180 for SFP-based access or Nexus 93108 for copper-based access.
Hope this helps.
Dave
11-21-2018 09:32 PM
11-21-2018 09:57 PM - edited 11-21-2018 10:01 PM
12-24 SFP+ ports and cheaper than a 3850? I don't this is possible.
Maybe a WS-C4500X-24X?
11-21-2018 07:59 AM
https://www.cisco.com/c/en/us/products/switches/switch-selector.html
M.
11-21-2018 01:30 PM
11-21-2018 09:31 PM
Customer only requiremnt is that is should be cheaper than 3850 series and customer need around switch which can support between 12-24 ports having 10G capability.
11-21-2018 11:43 PM
If your customer just wants a Cisco logo and low price I don't think you'll get 24 SFP+ ports cheaper than on a SG350XG-24
cheers,
Seb.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: