Re: switch problem

khuleni2011 · ‎07-25-2022

help!! switch 2950 all light are blinking when i turn it on

marce1000 · ‎07-25-2022

- Possible fatal hardware problem , do you still get any output on the console ?

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

khuleni2011 · ‎07-27-2022

i dont get any out output sir

Jitendra Kumar · ‎07-25-2022

This is also a case.

windows cluster (network load balanced) that was sending out multicast igmp packets.

change the mode to unicast, and switched the value for MaskSourceMAC from 1 to 0 in the registry on the windows servers that were load balanced.

Thanks,
Jitendra

khuleni2011 · ‎07-27-2022

will try that

Jitendra Kumar · ‎07-25-2022

If Nothing is written on the console.

Time for you to contact Cisco TAC and get the RMA

Thanks,
Jitendra

ashish.kushwaha · ‎07-26-2022

it is blinking orange and green

,,
Ashish K
***Please Rate Helpful Responses***

Jitendra Kumar · ‎07-26-2022

Have you connected the console cable with the switch??

Any output on the console??

Thanks,
Jitendra

khuleni2011 · ‎07-27-2022

no output sir

Jitendra Kumar · ‎07-27-2022

If you have support contract raise a RMA for them

Thanks,
Jitendra

khuleni2011 · ‎07-27-2022

yes