cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4282
Views
0
Helpful
6
Replies

Switch slow performance

taimoor khan
Level 1
Level 1

I am using 3500 series switch which is 1st configured on 2007 and now we are recieving complaint about that switch.

I has very high response Time as compare to others (Network Performance Monitor) , no mismatch error, no ports error but still facing high response time.

Can any one tell me why it that so ? what is the solution ? and what is the maximum age of switch ?

Thanks for help in advance.

6 Replies 6

mvsheik123
Level 7
Level 7

Hello,

Did you run the general checkups with the switch connections (ex: any existing uplink errors, CPU usage, config changes etc). Also, what

was the base response time for the switch?

thx

MS

Response time is 15 ms but other switches have 5 ms. I also check error reports which is good and 100 availability.

Leo Laohoo
Hall of Fame
Hall of Fame
and what is the maximum age of switch ?

3500XL is end-of-support back in 2007 and was available since 2000.  So it's a pretty old switch.

Have you tried rebooting the switch and see if this solves the issue?

switch rebooted a year ago and due to high traffic I am unable to reboot it now.

You said high traffic ...!!!

How high the traffic is........are the interfaces getting full load ??

if so, then definitely the switch responds slow i believe.,,,,.

switch rebooted a year ago and due to high traffic I am unable to reboot it now.

A year ago????  May I request if you post the following command output:

1.  sh version;

2.  sh log;

3.  sh controller e