cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
550
Views
0
Helpful
5
Replies

Switch WS-C2960G-48-TC-L can't booting IOS

Dani Simanjuntak
Beginner
Beginner

Hello Experts, I have problem with my Switch 2960G
LED on front switch is on, but when I console the IOS doesn't booting...

And, I can't rommon this switch,

please give me solution to solve this problem.
Thanks

 

 

5 Replies 5

Mukesh Kumar
Participant
Participant

Hello Dani Royman Simanjuntak

When you access your switch by using putty there is default console speed that is 9600 bps. If you are not able to access your switch by using the default console speed you can try with different console speeds like 4800, 1200, 2400, 19200, 38400, 57600, and 115200 baud.

 

Regards,
Mukesh Kumar
Network Engineer
Spooster IT Services

I have set baud rate 9600 and try another baud rate but not work,

I have install that switch and running properly two weeks ago, I think this problem not about console  .

Hello Dani Royman Simanjuntak

Have you tried some different terminal emulator like tera term, secure crt, hyper terminal, etc.?

Have you checked the COM port of the pc and console cable?

 

Regards,
Mukesh Kumar
Network Engineer
Spooster IT Services

Hello Mukesh Kumar,

I have try with Teraterm, SecureCRT, but not working..

Hello Dani Royman Simanjuntak

Have you connected the same console cable, emulator and PC on some other router/switch?

May be there will be a fault in the console cable or COM port of the pc.

 

Regards,
Mukesh Kumar
Network Engineer
Spooster IT Services

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers