If you are going to implement these new Cisco devices with the design you have in mind, please contact your Cisco rep to pass you on to a design engineer who will be glad to assist so that Cisco can work with you directly to come up with the best design for your environment and budget.
Looking at your design, are the firewall and router at the network edge single devices? If so it is better to cluster them for redundancy with a firewall cluster and possible an HSRP router configuration sytle. Again it would be best to work with Cisco to solidy the solution and work together to suit your design and budget.
_______________________________ Please rate helpful posts and answered questions!
Please rate helpful posts and answered questions!
Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con...
Connectivity Design considerations and recommendation
1.Management Access connectivity
If there is a dedicated OOB management path, consider connecting to CIMC and MGMT port.
If OOB path is not available, Connect the dedicated Management port to LAN Swi...
Cisco Digital Network Architecture Center Modules In this article, we are going to talk about Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and scalability to configure multiple fabric sites a...
This document provides an overview of DPDK and steps to configure and troubleshoot DPDK for OVS in NFVIS.
DPDK stands for Data Plane Development Kit, is a set of libraries that improves data plane performance.DPDK description