cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
386
Views
0
Helpful
3
Replies

Switching

muraripadhan
Level 1
Level 1

Dears,

I have 100 switches in my network

In every switch i have Admin username and password.

My username is "Admin"

       Password is "@dmin@d205"

       Enable password "@dmin@502

But my requirement

My manager said that for another user who can only view permission he can not modify any switch.

So how can  i configure another username and password with different "enable password' for that user, that user can only see permission.

I have to configure in every switch.

Please suggest me.

thanks and regards

Murari Mohan Padhan

3 Replies 3

james.buchanan1
Level 1
Level 1

Hello,

First, don't post usernames and passwords on public forums.

Second, I believe you can create a username and password with privilege 7 that will give only read-only rights. Something like:

username <username> privilege 7 password 0 <password>

Thanks,

James

Hi

As it was mentioned previously you could configure a username with privilege 7 and provide just the needed commands using privilege command line:

conf t

privilege exec level 7 <the allowed commands>

example

privilege exec level 7 show run  <-- the user will have access to see the show running config only. 

This link could be useful

http://www.ciscozine.com/multiple-privilege-levels/

:-)




>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<

Sir this is not my actual user name and password.

I know that how to create username and privilege 7 password but

Sir

When i create another name and password and i login from that username and password at that time its asking for enable password and after giving the the enable password.That user can  modify that switch.

Due to how i will protect my switch from that specific user?

Can i create different enable password for that user?

Review Cisco Networking for a $25 gift card