11-11-2004 05:40 AM - edited 03-05-2019 11:19 AM
Hello,
does anybody can tell me what is normal operating temperature of that card ?
Or if someone have that module can paste sh env temp output ?
I have few with outlet temperature around 50C which looks me too high...
Thanks,
Mladen
11-11-2004 06:54 AM
WS-X6704-10GE Environmental Conditions
Operating temperature: 32° to 104° F (0° to 40° C)
Storage temperature: -40° to 167° F (-40° to 75° C)
Relative humidity: 10 to 90 percent, noncondensing
Operating altitude: -60 to 4000 m
From data sheet CISCO CATALYST 6500 SERIES 10 GIGABIT ETHERNET MODULES on Cisco site.
ALex
11-11-2004 07:04 AM
Hello,
thanks for your reply,
I want to now temperature of working card, this data sheet only told us in which temperature range card can work...
Mladen
11-12-2004 12:09 AM
The working temperature is very dependant of the surrounding conditions, available air mass, air flow speeds and so on.
As th maximum enviroment temperature is set at 40C 50C is a very normal operating temperature.
I should start to worry if the enviroment temerature is mutch cooler than 40C as that would indicate that you do not have enough airflow through the chasis.
50c temperature can be fine for a good conditioned room but can be to high for an unconditioned room when outside temperatures are relatively low.
Most switches witch support temperature reading will send traps or even shut down if operating temperature gets exceeded.
RGZ
Tom
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide