Router>sh diagn mod 5
Current bootup diagnostic level: minimal
Module 5: Supervisor Engine 32 10GE (Active) SerialNo : SAL1010F4HS
Overall Diagnostic Result for Module 5 : MINOR ERROR
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) TestSPRPInbandPing --------------> U
2) TestTransceiverIntegrity:
Port 1 2
----------
U U
3) TestActiveToStandbyLoopback:
Port 1 2 3
-------------
U U U
4) TestLoopback:
Port 1 2 3
-------------
. . .
5) TestTxPathMonitoring ------------> .
6) TestNewIndexLearn ---------------> .
7) TestDontConditionalLearn --------> .
8) TestBadBpduTrap -----------------> .
9) TestMatchCapture ----------------> .
10) TestProtocolMatchChannel --------> F
11) TestFibDevices ------------------> .
12) TestIPv4FibShortcut -------------> .
13) TestL3Capture2 ------------------> .
14) TestIPv6FibShortcut -------------> .
15) TestMPLSFibShortcut -------------> .
16) TestNATFibShortcut --------------> .
17) TestAclPermit -------------------> .
18) TestAclDeny ---------------------> .
19) TestQoSTcam ---------------------> .
20) TestL3VlanMet -------------------> .
21) TestIngressSpan -----------------> .
22) TestEgressSpan ------------------> .
23) TestNetflowInlineRewrite:
Port 1 2 3
-------------
U U U
24) TestTrafficStress ---------------> U
25) TestFibTcamSSRAM ----------------> U
26) TestAsicMemory ------------------> U
27) TestAclQosTcam ------------------> U
28) TestNetflowTcam -----------------> U
29) ScheduleSwitchover --------------> U
30) TestFirmwareDiagStatus ----------> .
These are the test results of sup32-10GE(base),I Wonder if there are something wrong in software or hardware.How can i do for these .THANKS A LOT!by the way ,it is good for CATOS. <ios:s3223-ipbasek9-mz.122-18.SXF14.bin catos:cat6000-sup32pfc3cvk8.8-7-1.bin >