03-02-2019 01:19 AM
Hi, all
I need to upgrade Cisco IOS Software [Denali] version 16.3.6 to 16.3.7 on WS-C3850-24XS.
Can I know the required time in advance? It takes time to upgrade the HW image by Front-end Microcode IMG MGR...
Thank you for your cooperation in advance.
03-02-2019 01:51 AM
03-03-2019 08:24 PM
03-03-2019 11:59 PM
@SATORU SAEGUSA wrote:
request platform software package install switch all file flash:/cat3k_caa-universalk9.16.03.07.SPA.bin
The execution of this command will take approximately 20 to 30 minutes. This command will only PUSH the firmware to all the stack members.
Because you're going from 16.3 to another 16.3 a microcode upgrade is not going to happen.
Reboot of the stack will be around 6 to 7 minutes.
03-02-2019 05:06 AM
adding to @Leo Laohoo post.
Follow below prceedure.
Depends on how many switches in the stack, as per my experience, it was took 10-15min to reboot and come in to live and ready to use.
03-02-2019 11:33 AM
03-02-2019 02:21 PM
Don't forget the OP hasn't informed us whether or not the switch will be operating in Bundle Mode or Install Mode.
03-02-2019 02:46 PM
03-02-2019 08:18 PM
Don't forget that command to perform firmware upgrade in 3.X.X is totally different in 16.X.X.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide