10-03-2016 02:04 PM - last edited on 03-25-2019 04:40 PM by ciscomoderator
Hi support,
i have a three-tier design with Access DIstribution and Core.
Building 1 with many access switch and two distribution
Building 2 with some access switch and two distribution
Building 3 with some access switch and two distribution
All distributions switches are connected to 2 cores swicthes.
My question is how can i configured all distributions switch in vtp mode server and access in vtp client for the same vtp domaine on all buildings?
Many Thanks for your help
Solved! Go to Solution.
10-03-2016 08:40 PM
Hi;
It's depend on your connectivity b/w Core & Distribution switch:
If it's L3 links then each building have separate vtp domain (which is recommended & Best practice & vtp run as transparent mode)
If it's L2 links then you have same vtp domain in all 3 building via Core switch & your core should configure as STP root bridge.
Thanks & Best regards;
10-03-2016 08:40 PM
Hi;
It's depend on your connectivity b/w Core & Distribution switch:
If it's L3 links then each building have separate vtp domain (which is recommended & Best practice & vtp run as transparent mode)
If it's L2 links then you have same vtp domain in all 3 building via Core switch & your core should configure as STP root bridge.
Thanks & Best regards;
10-03-2016 10:07 PM
Thanks Ahmed for your reply
if i configured L2 links between distribution and core, its also fast like the other case?
what is the aim difference between the two case?
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide