cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1694
Views
0
Helpful
1
Replies

To know if the interface up, line protocol up with SNMP MIB?

syjeon
Level 1
Level 1


We can know whatever if the interface admin down or admin up on ifADminStatus.
and Whatever if operation or not, we can know with ifOperStatus.

for more detail, on the status interface admin up, Can we know the status interface up, line protocol up with SNMP mib?

Thanks in advance

1 Reply 1

Ganesh Hariharan
VIP Alumni
VIP Alumni
We can know whatever if the interface admin down or admin up on ifADminStatus.
and Whatever if operation or not, we can know with ifOperStatus.

for more detail, on the status interface admin up, Can we know the status interface up, line protocol up with SNMP mib?

Thanks in advance

Hi,

Check out the  below link :

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a05.shtml

Configure "snmp-server enable traps snmp linkup" & ""snmp-server enable traps snmp linkdown".

Hope to Help.

Ganesh.H

Remember to rate the helpful post

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: