03-25-2013 04:46 AM - edited 03-07-2019 12:28 PM
Hello,
when i make a traceroute on an ASR 1001 router to 172.23.30.7 I get the following output:
VRF info: (vrf in name/id, vrf out name/id)
1 192.168.99.192 0 msec
192.168.99.191 1 msec
192.168.99.192 0 msec
2 172.23.30.243 1 msec 1 msec 1 msec
3 172.23.30.7 1 msec 1 msec 1 msec
Is there a loop between 192.168.99.191 and .192 (this are two routers with hsrp .190) or is this normal behaviour when using traceroute on an asr 1001?
Greetings,
Simon
03-25-2013 06:10 AM
Hi,
That is not a normal behavior. Is HSRP configured correctly?
Can you post the HSRP configs from both routers?
HTH
03-25-2013 07:08 AM
Router1:
interface GigabitEthernet0/1
ip address 192.168.99.192 255.255.255.0
no ip redirects
no ip proxy-arp
standby 20 ip 192.168.99.190
standby 20 priority 140
standby 20 preempt
standby 20 authentication v21
Router2:
interface GigabitEthernet0/1
ip address 192.168.99.191 255.255.255.0
no ip redirects
no ip proxy-arp
standby 20 ip 192.168.99.190
standby 20 priority 120
standby 20 preempt
standby 20 authentication v21
no ip route-cache
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide