Trunking a vlan from Cat6500 to Nexus 7000

latintrpt · ‎09-09-2011

Hello,

I have a ca6500 that has a connection to a Nexus 7000.

I'm trunking one single VLAN from the 6500 to the Nexus 7000. From the Nexus 7000 I'm trunking that VLAN to a wireless controller. On the wireless controller I built an interface vlan on that network that the 6500

Is ther anything special I need to set to get this to work. I have set a up a trunk between the 6500 and 7000. I also have added the vlan from the 7000 to the wireless controller.

I still can't ping default gateway.

Any ideas?

Reza Sharifi · ‎09-09-2011

Is Nexus 7K running as a layer-2 device?

how about the 6500? If the 6500 is running is layer-3, did you create the SVI for the vlan you are using?

HTH

Somasundaram Jayaraman · ‎09-09-2011

Hi,

What is the spanning-tree states for that vlan in the trunk?

Show spanning-tree vlan

Show spanning-tree interface

Also pls check whether the vlan is pruned in this interface or not.

show interface pruning

Hope this helps

Cheers

Somu

Rate helpful posts