cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
223
Views
0
Helpful
2
Replies

Trunking between 6513 switches

ppufall
Level 1
Level 1

I have a project that wants to trunk between 2 switches so that the voice connection comes from one switch and the data connection comes from a 2nd switch. Is there any way this type of connection can be created?

2 Replies 2

Jon Marshall
Hall of Fame
Hall of Fame

Patrick

You've lost me :-)

Could you perhaps give a bit more detail ie. you have 2 x 6513 connected via a L2 trunk. What do you want to happen ?.

I'm assuming voice and data are in different vlans ?

Jon

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Patrick,

assuming as Jon has suggested that you have different vlan-ids for data traffic and for voice traffic you can select out what uplink to send traffic of a certain vlan by different means:

first of all by having two distribution switches dis1 and dis2 and making dis1 the root bridge for voice vlan and dis2 the root bridge for data vlan a third access layer switch can send and receive traffic of type x over link 1 and traffic of type y over link 2.

L3 services like HSRP can be configured following the root bridge.

plese provide more information on your scenario to get better help

Hope to help

Giuseppe

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: