06-16-2015 05:22 AM - edited 03-08-2019 12:34 AM
Hi,
I'm trying to add a new stack member for a stack of 3 members.
no success !
the 3 stacks are WS-3750X-T-S , I'm trying to add a WS-3750X-T-L.
they have the same IOS firmware.
no success !
Suggestions ?
Solved! Go to Solution.
06-16-2015 05:34 AM
You need to elaborate a little on 'no success'.
Effectively so far you have said.
'I have a problem, please help me' but you have not explained the symptoms of the issue.
06-16-2015 05:34 AM
You need to elaborate a little on 'no success'.
Effectively so far you have said.
'I have a problem, please help me' but you have not explained the symptoms of the issue.
06-16-2015 06:17 AM
I'm sorry.
let met add some information.
here is the output of the 3 members stack that does work -
#sh switch
Switch/Stack Mac Address : 3c08.f6d7.fc00
H/W Current
Switch# Role Mac Address Priority Version State
----------------------------------------------------------
1 Member 3c08.f6d8.0280 15 3 Ready
*2 Master 3c08.f6d7.fc00 14 3 Ready
3 Member 885a.92d2.3500 13 3 Ready
4 Member 0000.0000.0000 0 0 Provisioned
#sh version
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.2(3)E, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Sun 07-Dec-14 12:23 by prod_rel_team
ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(58r)SE1, RELEASE SOFTWARE (fc1)
SW-SDU_SERVERS-C uptime is 13 weeks, 4 days, 4 hours, 54 minutes
System returned to ROM by power-on
System restarted at 01:27:20 UTC Wed Mar 30 2011
System image file is "flash:c3750e-universalk9-mz.152-3.E.bin"
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Level: ipservices
License Type: Permanent
Next reload license Level: ipservices
cisco WS-C3750X-48 (PowerPC405) processor (revision A0) with 262144K bytes of memory.
Processor board ID FDO1750Z0PW
Last reset from power-on
3 Virtual Ethernet interfaces
1 FastEthernet interface
208 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 3C:08:F6:D7:FC:00
Motherboard assembly number : 73-12552-10
Motherboard serial number : FDO17500AL0
Model revision number : A0
Motherboard revision number : C0
Model number : WS-C3750X-48T-S
Daughterboard assembly number : 800-32727-03
Daughterboard serial number : FDO17492D3Y
System serial number : FDO1750Z0PW
Top Assembly Part Number : 800-31326-08
Top Assembly Revision Number : D0
Version ID : V05
CLEI Code Number : COMJT00ARE
Hardware Board Revision Number : 0x05
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
1 54 WS-C3750X-48 15.2(3)E C3750E-UNIVERSALK9-M
* 2 54 WS-C3750X-48 15.2(3)E C3750E-UNIVERSALK9-M
3 54 WS-C3750X-48P 15.2(3)E C3750E-UNIVERSALK9-M
Switch 01
---------
Switch Uptime : 10 weeks, 2 days, 5 hours, 15 minutes
Base ethernet MAC Address : 3C:08:F6:D8:02:80
Motherboard assembly number : 73-12552-10
Motherboard serial number : FDO17500AWG
Model revision number : A0
Motherboard revision number : C0
Model number : WS-C3750X-48T-S
Daughterboard assembly number : 800-32727-03
Daughterboard serial number : FDO17492DB3
System serial number : FDO1750Z0P7
Top assembly part number : 800-31326-08
Top assembly revision number : D0
Version ID : V05
CLEI Code Number : COMJT00ARE
License Level : ipbase
License Type : Permanent
Next reboot licensing Level : ipbase
Switch 03
---------
Switch Uptime : 23 hours, 24 minutes
Base ethernet MAC Address : 88:5A:92:D2:35:00
Motherboard assembly number : 73-12553-10
Motherboard serial number : FDO17390MFS
Model revision number : A0
Motherboard revision number : B0
Model number : WS-C3750X-48PF-S
Daughterboard assembly number : 800-32727-03
Daughterboard serial number : FDO17381BC5
System serial number : FDO1739R0WT
Top assembly part number : 800-31324-08
Top assembly revision number : C0
Version ID : V05
CLEI Code Number : COMJZ00ARE
License Level : ipservices
License Type : Permanent
Next reboot licensing Level : ipservices
Configuration register is 0xF
here is the output of the new stack member that I'm trying to add-
File "flash:/c3750e-universalk9-mz.152-3.E/c3750e-universalk9-mz.152-3.E.bin" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.2(3)E, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Sun 07-Dec-14 12:23 by prod_rel_team
Initializing flashfs...
Using driver version 4 for media type 1
mifs[4]: 1 files, 1 directories
mifs[4]: Total bytes : 6838272
mifs[4]: Bytes used : 1956352
mifs[4]: Bytes available : 4881920
mifs[4]: mifs fsck took 0 seconds.
mifs[4]: Initialization complete.
Using driver version 4 for media type 2
mifs[7]: 10 files, 1 directories
mifs[7]: Total bytes : 2097152
mifs[7]: Bytes used : 689664
mifs[7]: Bytes available : 1407488
mifs[7]: mifs fsck took 0 seconds.
mifs[7]: Initialization complete.
mifs[8]: 0 files, 1 directories
mifs[8]: Total bytes : 4194304
mifs[8]: Bytes used : 1024
mifs[8]: Bytes available : 4193280
mifs[8]: mifs fsck took 0 seconds.
mifs[8]: Initialization complete.
mifs[9]: 5 files, 1 directories
mifs[9]: Total bytes : 524288
mifs[9]: Bytes used : 12288
mifs[9]: Bytes available : 512000
mifs[9]: mifs fsck took 0 seconds.
mifs[9]: Initialization complete.
mifs[10]: 5 files, 1 directories
mifs[10]: Total bytes : 524288
mifs[10]: Bytes used : 12288
mifs[10]: Bytes available : 512000
mifs[10]: mifs fsck took 1 seconds.
mifs[10]: Initialization complete.
mifs[11]: 552 files, 11 directories
mifs[11]: Total bytes : 57671680
mifs[11]: Bytes used : 32288256
mifs[11]: Bytes available : 25383424
mifs[11]: mifs fsck took 0 seconds.
mifs[11]: Initialization complete.
...done Initializing flashfs.
Checking for Bootloader upgrade..
Boot Loader upgrade not required (Stage 2)
FIPS: Flash Key Check : Begin
FIPS: Flash Key Check : End, Not Found, FIPS Mode Not Enabled
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed
POST: MA BIST : Begin
POST: MA BIST : End, Status Passed
POST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passed
POST: SF ASIC BIST : Begin
POST: SF ASIC BIST : End, Status Passed
POST: Switch Fabric Memory Tests : Begin
POST: Switch Fabric Memory Tests : End, Status Passed
POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed
POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed
extracting front_end/front_end_ucode_info (309 bytes)
SM: Detected stack cables at PORT2
Waiting for Stack Master Election...
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
POST: PortASIC Macsec Loopback Tests : Begin
POST: PortASIC Macsec Loopback Tests : End, Status Passed
POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status Passed
Election Complete
Switch 1 booting as Master
Waiting for Port download...Complete
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C3750X-48 (PowerPC405) processor (revision T0) with 262144K bytes of memory.
Processor board ID FDO1903P1HJ
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
52 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 74:A2:E6:DE:B0:80
Motherboard assembly number : 73-12552-12
Motherboard serial number : FDO19031JS4
Model revision number : T0
Motherboard revision number : A0
Model number : WS-C3750X-48T-L
Daughterboard assembly number : 800-32727-03
Daughterboard serial number : FDO19030WU1
System serial number : FDO1903P1HJ
Top Assembly Part Number : 800-31326-09
Top Assembly Revision Number : F0
Version ID : V06
CLEI Code Number : CMMPN00DRA
Hardware Board Revision Number : 0x05
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 54 WS-C3750X-48 15.2(3)E C3750E-UNIVERSALK9-M
Press RETURN to get started!
and they don't recognize each other.
any suggestions ?
06-16-2015 07:16 AM
Did you follow this link to add the new member:
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/71925-cat3750-create-switch-stks.html#stack3
Make sure the new switch does not have any config on it and to connect the stacking cable before turning it on.
HTH
06-16-2015 07:20 AM
Hi,
the issue was that the stack ports got shutdown by itself.
maybe it happend due to the fact the 4th switch was in LAN Base license.
I've upgraded the license to ipservices and activated it - yet it didn't came up.
when I tried the command show swtich stack-ports - I've noticed that there are 2 ports that are on "down".
so I've initiated the command switch <number> stack port <number> enable
and it had solved the problem.
06-16-2015 07:24 AM
Thanks for the update
Glad to know the issue is resolved.
06-16-2015 06:21 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
If the -S is a standard license and the -L a base license, you cannot mix them in the same stack.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide