cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2618
Views
0
Helpful
5
Replies
Highlighted
Beginner

Turn Off 802.1x Console Messages

Hello,

Is there a way to turn off 802.1x authentication messages to the console of a 3750 switch? The issue we have is that we like to monitor the terminal when remotely configuring our switches. However, every time a computer authenticates to the network we get messages and sometimes quite a few depending on the situation.

Thanks, Elton

Sent from Cisco Technical Support iPhone App

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Elton,

you could use a logging discriminator to filter undesired messages.

http://www.cisco.com/en/US/docs/ios-xml/ios/esm/command/esm-cr-a1.html#GUID-B7887982-361D-4C8E-BAAF-977AEC1C78EA

An example:

! filter out MAB or AUTHMGR messages (Pipe "|" means "OR")

logging discriminator DOT1X facility drops MAB|AUTHMGR

! applying to console-logging

logging console discriminator DOT1X

HTH

Rolf

View solution in original post

5 REPLIES 5
Highlighted
Rising star

Hi Elron,

May be you will have to disable entire logging on console using "no logging console" .

I'm not aware of any command which specifically disable 802.1x im affraid :-(

Regards

Najaf

Please rate when applicable or helpful !!!

Highlighted

Yeah I haven't found anything as of yet either. We like to see our interfaces come up obviously and other messages but most of the time we don't need to know when a computer authenticates on a port. Ill keep looking. Thanks for your help.

Sent from Cisco Technical Support iPhone App

Highlighted

Elton,

you could use a logging discriminator to filter undesired messages.

http://www.cisco.com/en/US/docs/ios-xml/ios/esm/command/esm-cr-a1.html#GUID-B7887982-361D-4C8E-BAAF-977AEC1C78EA

An example:

! filter out MAB or AUTHMGR messages (Pipe "|" means "OR")

logging discriminator DOT1X facility drops MAB|AUTHMGR

! applying to console-logging

logging console discriminator DOT1X

HTH

Rolf

View solution in original post

Highlighted

Guys,

I have tried lots of option to suppress the buffer logs for these message but  %SW_DAI-4-DHCP_SNOOPING_DENY.. unable to achieve... any suggestion..

Highlighted

Content for Community-Ad