We have two cards HWIC-4ESW on router 3845 but we need that the two cards 8 ports conected betwen, if a pc on port 1 can ping a pc conected on port 8 on second card. tis comunication can,t doing a pc on port 1 can,t conected a pc on port 8.
the configuration is the folowing
interface FastEthernet0/0/0
switchport access vlan 100
speed 100
spanning-tree portfast
!
interface FastEthernet0/0/1
switchport access vlan 100
speed 100
!
interface FastEthernet0/0/2
switchport access vlan 100
speed 100
!
interface FastEthernet0/0/3
switchport access vlan 100
speed 100
spanning-tree portfast
!
interface FastEthernet0/1/0
switchport access vlan 200
spanning-tree portfast
!
interface FastEthernet0/1/1
switchport access vlan 200
!
interface FastEthernet0/1/2
switchport access vlan 200
!
interface FastEthernet0/1/3
switchport access vlan 200
interface Vlan100
no ip address
bridge-group 1
!
interface Vlan200
no ip address
bridge-group 1
!
interface BVI1
description Interface con cantv // L2 interno router
ip address x.x.x.x x.x.x.x secondary
ip address x.x.x.x x.x.x.x