11-24-2008 05:05 PM - edited 03-06-2019 02:39 AM
Hello,
If UDLD (normal -not aggressive-)is only configured on one switch A and not on the remote one (switch B),
will switch B counter/add UDLD packets received as runt (smaller than 64 octets packets) or as any other error ?
Will the switch B react regarding its hardware or software ? (a cat3750 switch will not react as a cat2950 switch as switch B) ?
Regards,
Solved! Go to Solution.
11-25-2008 03:08 AM
The situation would work like this:-
Switch B successfully receives traffic from Switch A on the interface. However, Switch A does not receive traffic from Switch B on the same interface. UDLD detects the problem and disables the interface.
Ideally you could have it on both sides.
HTH>
11-25-2008 09:33 AM
Hi,
UDLD (or any other protocol!) will never create packets shorter than the minimum legal length for the media. (64 bytes for Ethernet). Also, UDLD won't do much if it's only on one end - but the multicasts it generates will simply be ignored by the other end.
HTH
Andrew.
11-25-2008 03:08 AM
The situation would work like this:-
Switch B successfully receives traffic from Switch A on the interface. However, Switch A does not receive traffic from Switch B on the same interface. UDLD detects the problem and disables the interface.
Ideally you could have it on both sides.
HTH>
11-25-2008 04:02 AM
hello Andrew,
ideally, yes the feature should be configured on both sides.
In my situation, this is not (I have no access on switch A) and switch A has a single attachement to only switch B (there is no redondancy, no port blocking by STP).
before the ends customers (switch A and B) update there configuration to have the 2 of them having UDLD configured the same way, I'm ask to look for the switch B reacts.
I aggree, that it is easier to just configure UDLD on both side the same way. But I could get information about the way to handle such UDLD packets, this would be great (on the side not yet configured for UDLD).
Regards,
11-25-2008 04:31 AM
11-25-2008 06:04 AM
hello Andrew,
Thank your very much for this link (configuration and why to use it), but I didn't find the answer I'm looking for.
Best regards,
11-25-2008 06:07 AM
What are you looking for - that link has to some pretty cool stuff?
11-25-2008 06:19 AM
Hello Andrew,
I'm sorry I don't understand "pretty cool stuff".
The end customer see some runts errors on the switch B, and i'm looking for if those runts are or aren't the UDLD packets received. The link beetween A and B is provided by an Internet Operator who said that the link is ok, and I can't get a sniffer on any of those sites.
What I know is that UDLD is configured on swith A, not on switch B.
I know I have only a few information(s).
Anyway i'm trying with this forum, if someone knows. I can not open a TAC case just for this.
Anyway thank you very much for the time you spand trying to help me. I DO appreciate.
Best regards,
11-25-2008 06:35 AM
My "pretty cool stuff" was the explanation of how it works - at a basic level
Runts are typically packets that are to small, I seem to vagely remember a runt is smaller than 64 bytes!
But I have read somewhere that a UDLD frame is 64 bytes....but might be smaller if the TLV is not used.
HTH>
11-25-2008 06:38 AM
Yep - quick search in the RFC database, you should read the below - a more in depth working of Cisco's UDLD:-
http://tools.ietf.org/html/rfc5171
11-25-2008 07:05 AM
Hello Andrew,
yes, that a very (very very) nice link, I should read ( and re-read).
maybe some IOS do not use all of those TLV, and of course the length of each one (or some of them may not be always the same (like the device name one)). So regarding some TLV used by one IOS release, maybe I get a runt packet. well I think it will be very difficul to find more information.
Andrew, thank you very much for your help, I do appreciate.
Best regards,
11-25-2008 07:40 AM
That is possible I suppose! Try searching the feature navigator based on IOS version, this may give some results:-
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
np - glad to help.
11-25-2008 09:33 AM
Hi,
UDLD (or any other protocol!) will never create packets shorter than the minimum legal length for the media. (64 bytes for Ethernet). Also, UDLD won't do much if it's only on one end - but the multicasts it generates will simply be ignored by the other end.
HTH
Andrew.
11-25-2008 10:02 AM
hello Andrew,
Thank you very much for this information.
best Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide