I have four 6509 switches connected in full mesh. The IOS is 12.2(33)SXI4a. Spanning tree mode configured is RPVST+. The switches are connected using fiber cables.
UDLD default hello interval is 15 sec. Going through Cisco documentation regarding UDLD, I noticed that holdtime of UDLD should be less than convergence time of spanning tree. Taking this into consideration, what should I set UDLD hello interval so that UDLD will take care of unidirectional links without causing a spanning tree loop to occur.
Convergence time depends on how well the network is configured with uplinkfast/backbonefast/portfast features. Normally the convergence time with RPVST+ is about 5 sec.
Configuring fast UDLD is a good idea. If one of the links becomes unidirectional, Fast UDLD detects this situation faster than regular UDLD and errdisables the link. Traffic is switched over to the second link by EtherChannel. Because this occurs very quickly, traffic loss is minimized.
IntroductionCisco DNA Center Deployment StepsISE Deployment Steps
Host Onboarding is the term used when connecting an endpoint (hosts , IOT , Other devices) to the fabric , and can be accomplished in a couple of ways.One option is the "static...
good morning I have this report from users, saying that they encounter connection issue only when they are wired , but the wireless I fine. both connection are using the same path to the internet ...please advised a troubleshooting plan.
Enterprise Switching Business Unit is glad to announce Beta release 16.12.3 for all Catalyst 9200/9300/9400/9500/9600. This release is made available to allow users to test, evaluate and share feedback before General Avail...
Hello.I make tools for gt CDP/LLDP data? VLANs/SVI and connected hosts (MAC/IP/Vendor).Work rfom windows.Can be exported to xml/json filedownload from: http://www.powerc.ru/download/PowerTOOLS.msi (for Windows).If You have questions please contact wi...