hello,
I have tried with hardcode to 1000 7 Full on the ports which are connected to another switch.
After changing the port to auto from one side of the switch port came up. Is there any solution to make port up when both sides are hard coded to 1000 & full duplex.
Simple Words:
Switch 1 --> Switch 2 --> Hard coded to 1000 & Full --> Down.
Switch 1 --> Switch 2 --> Auto on one end to Switch 1 --> Up.
Switch model:
Switch 1 Cisco 3750x (Gi Switch)
Switch 2 Cisco 3750 (Gi Switch)
Regards,
Ezra.