Unable to perform "ip nat inside source static tcp xxx interface" command

[lilei2010]

Platform:

cisco6509-E   with FWSM

Supervisor Engine 32 PISA 8GE

sup-bootdisk:s32p3-adventerprisek9_wan-mz.122-18.ZY2.bin

======================================================================================

command:

(config)#ip nat inside source static tcp 10.10.8.147 14029 interface g7/8 14029

(config)#no ip nat inside source static tcp 10.10.8.147 14029 interface g7/8 14029

#clear ip nat tran *

(config)#ip nat inside source static tcp 10.10.8.147 14029 interface g7/8 14029

%Port 14029 is being used by system 

Or %Static entry in use, cannot change

But when I perform "sh ip nat tran" command,There is nothing

[Gabriel Hill]

A possible fix would to to remove "ip nat outside" from your outside interface, do a "clear ip nat tran *" then add your new NAT statement and add the ip nat outside.

There are some bugs regarding this:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd16493