cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

68
Views
0
Helpful
5
Replies
Beginner

Unable to ping VLAN IP

unable to ping vlan ip from directly connected router

 

Router Model -Cisco 1812

Configuration

-----------------------

CHAN-WH-512#sh run int vlan1
Building configuration...

Current configuration : 126 bytes
!
interface Vlan1
 description ***** Local Lan *****
 ip address 10.175.16.21 255.255.240.0
 ip access-group vcontrol in
end

CHAN-WH-512#ping 10.175.16.21

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.175.16.21, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)

 

Thanks in advance

Asif

5 REPLIES 5

Hello,Could you please post

Hello,

Could you please post what rules are in the "vcontrol" acl, probably something is wrong with the rules or the way it's applied.

Beginner

Thanks...plz find the

Thanks...

plz find the attachment

Highlighted

Try adding as a last rule

Try adding as a last rule(before the implicit deny) this:

 

permit icmp any any

 

Try to see if it works,and after that if you don't want other devices pinging the router you can be more specific.

Beginner

Thanks...Its working..Can you

Thanks...Its working..

Can you please elaborate an issue..

 

but in other location configuration , we haven't specified "permit icmp any any" rule but able to ping form directly connected VLAN...

 

 

And the acl has the same

And the acl has the same rules and it is applied inbound in that location also?

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards