unable to save running config on Nexus 7k ( 9 slot chassis )

[Vivek]

Hi Expert , 

i am trying to save configuration on one of our core switch ( nexus 7k ) and while saving config , i am getting below errors ... 

MAK-Nexus7000-1# copy run start
[########################################] 100%
Configuration update aborted: request was aborted

2018 Jan 24 10:18:12 MAK-Nexus7000-1 %USER-3-SYSTEM_MSG: frequency file /mnt/pss/ntp.drift.TEMP: Read-only file system - ntpd

2018 Jan 24 11:58:24 MAK-Nexus7000-1 %AAA-3-AAA_ERR_MSG: File Writing Failed for /mnt/pss/aaa_vdc_1.seqnum
2018 Jan 24 11:58:29 MAK-Nexus7000-1 last message repeated 3 times
2018 Jan 24 11:58:29 MAK-Nexus7000-1 %SYSMGR-3-CFGWRITE_FAILED: Configuration copy failed (error-id 0x401E0004).
2018 Jan 24 11:58:29 MAK-Nexus7000-1 %SYSMGR-3-CFGWRITE_FAILED: Configuration copy failed (error-id 0x401E0000).
2018 Jan 24 10:20:16 MAK-Nexus7000-1 %SYSMGR-3-VAR_SYSMGR_FULL: System Manager file storage usage is unexpectedly high at 100%. This may impact system functions.

2018 Jan 24 11:58:24 MAK-Nexus7000-1 %AAA-3-AAA_ERR_MSG: File Writing Failed for /mnt/pss/aaa_vdc_1.seqnum
2018 Jan 24 11:58:29 MAK-Nexus7000-1 %SYSMGR-3-CFGWRITE_FAILED: Configuration copy failed (error-id 0x401E0004).
2018 Jan 24 11:58:29 MAK-Nexus7000-1 %SYSMGR-3-CFGWRITE_FAILED: Configuration copy failed (error-id 0x401E0000).

Currently running code is : n7000-s2-dk9.6.2.12.bin

immediate response would be appricated  

[Philip D'Ath]

This can sometimes happen when the flash is failing or has failed.

I would make a manual backup of the configuration file and save it to your machine.  I would avoid rebooting.

[mvsheik123]

Hi,

There were couple Field Notices about this issue. Error code may not be the same.. Check below links..

https://quickview.cloudapps.cisco.com/quickview/bug/CSCtj87129

https://www.cisco.com/c/en/us/support/docs/field-notices/639/fn63975.html

Thanks,

MS

[Vivek]

Hey hi ,

Thanks for your reply , will check field notice and get back to you with update .