Upgradation Catalyst 9000 series

[Siva chinap]

Dear All,

We intend to upgrade the following devices; please advise if there will be any difficulties in upgrading to a newer version before proceeding. Is there anything else I should consider  before upgrading?

Cisco Switch C9300-48P-E	16.12.02	17.3.4
Cisco Switch C9300-24P-E	16.12.02	17.3.4
Cisco Switch C9500-16X	16.9.5	17.3.4

[marce1000]

 - Perhaps more mandatory then to consider is getting familiar with the release notes :

             https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/17-3/release_notes/ol-17-3-9300.html

 and or in particular : https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/17-3/release_notes/ol-17-3-9300.html#id_67613

 M.

[Siva chinap]

Many thanks @marce1000 

[balaji.bandi]

I do not see any issue, you can upgrade to 17.3.X code from the mentioned device

you need to note :

1. always read the release notes

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/17-3/release_notes/ol-17-3-9300.html

2. configuration backup out of of box.

3. Do the upgrade in maintenance window, since it required reload stack or device

4. anything above 16.9.X  is smart License.

[Siva chinap]

@balaji.bandi Many thanks, do we need to sync the switch to the smartlicensing portal. Will it be any problem if we are not syncing to smart licensing portal?

[balaji.bandi]

for compliance, you need to sync with a smart License to get an additional License to work as expected. if not it will fall back to basic License like Essential, 

[Leo Laohoo]

Take note this is an upgrade from 16.X.X to 17.X.X.  This means a mandatory (and automatic) micro-code upgrade.  This will take between 10 to 14 minutes.  

[Siva chinap]

@Leo LaohooMany Thanks.