cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
721
Views
0
Helpful
6
Replies

Upgrade 4510 Single Sup 2 Chassis setup as VSS

Ruger
Level 1
Level 1

Can you go straight from 3.02.02 to 3.11.01?

Sup7

ROM: 15.0(1r)SG1

 

6 Replies 6

balaji.bandi
Hall of Fame
Hall of Fame

if you have ROM: 15.0(1r)SG1  - Straight upgrade.

 

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/ol-311xe-4500x.html

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Yea I know you have to upgrade RomMon first...

Sure just want to heads up the proceedure, hope you now know how to upgrade.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Response makes no sense, just asking since it is several major steps from 3.02.02 to 3.11.01 if it is possible to go straight.

Not sure why you are under the impression that the response BB provided does not make sense. The answer he gave you in his first post is correct. You can jump directly from 3.02.02 to 3.11.01. Just make sure to do a complete backup of your config before the upgrade and do the upgrade in a maintenance window as it does require downtime and in some cases, you may lose part of the config.

HTH

 

Leo Laohoo
Hall of Fame
Hall of Fame

@Ruger wrote:
ROM: 15.0(1r)SG1

First, upgrade the ROMMON to, a minimum, 15.0(1R)SG11 (Upgrading the System Software).  If possible, go straight to 15.0(1r)SG16


@Ruger wrote:

3.11.01


Next, why 3.11.1?  This version has been released since December 2019.  

If TAC has "recommended" 3.11.1 then ask them about the more recently-released 3.11.4 (released 22 March 2021).

Next, upgrading from 3.2.X to 3.11.X can be done.  

And finally, a working upgrade process can be found HERE.

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: