Hi,
I am trying to upgrade Cisco 4948, I did the command, boot system flash bootflash:cat4500-ipbase-mz.122-31.SGA4.bin but it still does not boot up with the new image, when I did show bootvar, this is what I got
CiscocsF01a(config)#do sh bootvar
BOOT variable = bootflash:cat4500-ipbase-mz.122-31.SGA4.bin,12;cat4500-ipbasek9-
mz.150-2.SG10.bin,1;
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2102
can anyone point out what I am missing?
Thanks
Divya