08-12-2018 08:00 PM - edited 03-08-2019 03:53 PM
Hello,
Hello,
We have to upgrade ios on the stacked switch
The ports of Both switches (SW1&SW2 No LACP )are connected to one server (teaming port)
Can we upgrade without interrupting server connection?
When I upgrade switch 1, switch 2 should be active and when I upgrade switch 2, switch 1 should be active
Thank you
Solved! Go to Solution.
08-13-2018 12:06 AM
@leyakhath muhammed wrote:
Can we upgrade without interrupting server connection?
Nope.
@leyakhath muhammed wrote:
When I upgrade switch 1, switch 2 should be active and when I upgrade switch 2, switch 1 should be active
Not going to work. One of the switches will not join the stack because the firmware is different to the active unit.
Recommend you organize for a window to get this done properly.
08-12-2018 08:55 PM
Hi
What model of switches do you have?
Is this stack running as L2 or L3 switch?
You can push the software on all stack members and reload switch by switch.
08-13-2018 12:06 AM
@leyakhath muhammed wrote:
Can we upgrade without interrupting server connection?
Nope.
@leyakhath muhammed wrote:
When I upgrade switch 1, switch 2 should be active and when I upgrade switch 2, switch 1 should be active
Not going to work. One of the switches will not join the stack because the firmware is different to the active unit.
Recommend you organize for a window to get this done properly.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: