Upgrading 4006 Sup II CAT to Sup III IOS

[poirot1967]

We have an old 4006 with a Sup II that is limping.  I have a spare Sup III from another 4006.  Can I replce the Sup II with the Sup III?  The 4006 is a HW version 5, and the CATOS is 7.6.  The Sup III is IOS 12.2(18) and FW 12.1(20r).  I guess the question is will the HW ver 5 4006 chassis support the Sup III as a direct swap?  I have a 2960 just itching to go, but need more than 24 ports, and I don't really want to unount then remount a different 4006 chassis

Thanks

Mack

[Fabienne Stephanoff]

Both the 4006 and the sup III are end of support so not sure this would really buy you much in terms of an "upgrade".

The sup III should be supported in this chassis:

https://www.ciscotaccc.com/kaidara-advisor/lanswitching/showcase?case=K91670343

Cheers,

Fabienne.