Hi Guys
I have two ws-6506-e. Each one has two Supervisor Engine 720. I want to upgrade IOSs to SXJ10.
6506#dir /all
Directory of sup-bootdisk:/
1 -rw- 49484772 Dec 27 2003 01:19:28 +03:30 s72033-ipservicesk9-mz.122-33.SXH8a.bin
2 -rw- 33554432 Dec 27 2003 01:31:56 +03:30 sea_log.dat
6 -rw- 808929 Aug 14 2012 09:19:38 +04:30 TS6506CAM1
7 -rw- 86659364 Apr 11 2016 15:34:52 +04:30 s72033-ipservicesk9-mz.122-33.SXJ10.bin
6506#sh ver
System image file is "sup-bootdisk:s72033-ipservicesk9-mz.122-33.SXH8a.bin"
6506#sh run | i boot
boot-start-marker
boot system flash s72033-ipservicesk9-mz.122-33.SXJ10.bin
boot system flash s72033-ipservicesk9-mz.122-33.SXH8a.bin
boot system sup-bootflash:s72033-ipservicesk9-mz.122-33.SXH8a.bin
boot-end-marker
I uploaded the intended IOS into sup-bootdisk:/. But I don't know how to upload that IOS into standby supervisor as well. Is it the right place to upload the IOS or for main supervisor and standby I should upload IOS in different places?
About the "boot system" command, is the one that I have is OK or I should insert different command?
Thanks