07-15-2008 06:01 AM - edited 03-06-2019 12:11 AM
Are there any caveats that I should be aware of during this process. I am aware of the change in the slots, but is there any issues that I can expect to encounter?
Any assistance would be appreciated.
07-15-2008 09:23 AM
Hi!
I don't recall any specific caveats with regard to this upgrade. Only thing is that if your chassis is not an "E" chassies i.e. 65xx-E, then you may have to upgrade the fan as the default fan option in the older chassis ios not sufficient for the cooling requirements.
You may also have to look at your power supply WRT the new SUP requirements combined with your other card requirements.
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_qas09186a0080159963.html
Regards,
Niranjan
(pls rate if helpful)
07-16-2008 09:48 AM
Since the 6509 is running IOS, will there be any issues with the Vlans or VTP that I need to watch out for?
07-17-2008 02:24 AM
hi!
This upgradation shouldnot cause any problems to vlans or VTP ( assuming that you change the vlan port assignment / config to account for slot changes of line cards if any.)
Regards,
Niranjan
07-17-2008 01:55 AM
I recently upgraded SupII to Sup720's on a considerable number of 6500's. The slot numbers will change from 1/2 to 5/6. We needed to upgrade our PSU's to 3000W 16Amp power supplies. Fan tray upgrades were required together with using the 6500-E chassis.
Remember also that you will need to install the new Sup's in slots 5/6. Since this is the case the configuration will need to be modified accordingly. Hope this helps.
Regards
Steve
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide