cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
993
Views
0
Helpful
4
Replies

upgrading a vss

srego4
Level 2
Level 2

is it possible to upgrade a vss switch - one at a time?

i have a lot of servers on my vss switches. if i do the normal upgrade, i have to reboot the vss and loose both my physical switches and all server connectivity is lost. I am wondering if there is any way that the interswitch link can be broken (break the vss) then upgrade one switch at a time and then redo the vss link?                    

1 Accepted Solution

Accepted Solutions

Hi,

The direction is pretty much the same as 122-50.SY.  I have also Sup-2T with IOS 15.0

Here is the config guide for 15.1SY which is the latest.

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/15.1SY/config_guide/sup2T/virtual_switching_systems.html#wp1279478

HTH

View solution in original post

4 Replies 4

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

Yes, you need to use eFSU to upgrade one switch at a time.

See this link:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html#wp1169328

HTH

thanks reza. i had seen this info on this link. i should have mentioned that i have sup2t supervisors and my current ios version is s2t54-ipservicesk9-mz.SPA.122-50.SY.bin    --- s2t54 Software (s2t54-IPSERVICESK9-M), Version 12.2(50)SY.

all the esfu upgrade info that i read relates to SX versions. Is there an SX version available to use with sup 2t's?

thanks,

Hi,

The direction is pretty much the same as 122-50.SY.  I have also Sup-2T with IOS 15.0

Here is the config guide for 15.1SY which is the latest.

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/15.1SY/config_guide/sup2T/virtual_switching_systems.html#wp1279478

HTH

thanks reza. will look into the second link.

Review Cisco Networking for a $25 gift card