cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
906
Views
10
Helpful
3
Replies
Highlighted
Beginner

Upgrading IOS in WS-X45-SUP8-E on a WS-C4507R+E

I wish to upgrade the IOS software from 03.08.05.E to 3.08.07. Please let me know the procedure to do this. I can't find instructions anywhere on the Cisco site.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
Hall of Fame Community Legend


@scottsassin wrote:

I wish to upgrade the IOS software from 03.08.05.E to 3.08.07. Please let me know the procedure to do this. I can't find instructions anywhere on the Cisco site.


IMPORTANT:  Read the Release Notes

  1. Copy the IOS into the supervisor card; 
  2. Compare the MD5 hash value of the IOS (in the supervisor card) against the MD5 hash value found in the Cisco website; 
  3. Make sure the config-registry is 0x2102;
  4. Change the boot variable string to point to the new IOS;
  5. Add a boot variable string to point to the old IOS;
  6. Save the config
  7. Reboot.

View solution in original post

Highlighted
Hall of Fame Community Legend

Standalone.
For VSS, between 1 and 2, add the process of "Copy the IOS into the secondary supervisor card".

View solution in original post

3 REPLIES 3
Highlighted
Hall of Fame Community Legend


@scottsassin wrote:

I wish to upgrade the IOS software from 03.08.05.E to 3.08.07. Please let me know the procedure to do this. I can't find instructions anywhere on the Cisco site.


IMPORTANT:  Read the Release Notes

  1. Copy the IOS into the supervisor card; 
  2. Compare the MD5 hash value of the IOS (in the supervisor card) against the MD5 hash value found in the Cisco website; 
  3. Make sure the config-registry is 0x2102;
  4. Change the boot variable string to point to the new IOS;
  5. Add a boot variable string to point to the old IOS;
  6. Save the config
  7. Reboot.

View solution in original post

Highlighted

@Leo Laohoo agree with this steps, is this standalone or VSS ?

 

BB
*** Rate All Helpful Responses ***
Highlighted
Hall of Fame Community Legend

Standalone.
For VSS, between 1 and 2, add the process of "Copy the IOS into the secondary supervisor card".

View solution in original post

Content for Community-Ad