cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

317
Views
0
Helpful
8
Replies
Highlighted
Beginner

uplinking vtp transparent X vtp server

Is there any trouble to fiber trunk NX7000 version 5.2(7) vtp server to NX5020 version 4.0(1a)N2(1) vtp transparent unless manual vlans configuration?

Everyone's tags (3)
3 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Expert

uplinking vtp transparent X vtp server

By default, VTP is disabled on 7ks and 5ks.  If you really want to run VTP, than you have to turn on that feature.

HTH

View solution in original post

VIP Expert

uplinking vtp transparent X vtp server

Yes, they can, but if you are trying to use one 7k as vtp server and one as transparent, then vlans will not propagate from server to the transparent switch.  If you want the vlan to propagate from the server, than you need to make the other 7k a client.

HTH

View solution in original post

VIP Expert

uplinking vtp transparent X vtp server

Yes, that should work fine.

HTH

View solution in original post

8 REPLIES 8
VIP Expert

uplinking vtp transparent X vtp server

By default, VTP is disabled on 7ks and 5ks.  If you really want to run VTP, than you have to turn on that feature.

HTH

View solution in original post

Beginner

uplinking vtp transparent X vtp server

The questio is:

NX-OS is running server version.

NX-OS is running version4.0 that has one possibility : transparent mode.

Can these two modes run fine together ?

Regards,

Rosa

VIP Expert

uplinking vtp transparent X vtp server

Yes, they can, but if you are trying to use one 7k as vtp server and one as transparent, then vlans will not propagate from server to the transparent switch.  If you want the vlan to propagate from the server, than you need to make the other 7k a client.

HTH

View solution in original post

Beginner

uplinking vtp transparent X vtp server

That is the case, NX5020 is running vesrsion 4.0 which only has transparent mode, nothing else.

As I need Nx7000 and Nx5020 working togheter interoperability is mandatory.

If interoperability is possible betwen transparent (manual vlan config) and serve modes I guess i am not in trouble.

That is the case.

Regards,

Rosa

VIP Expert

uplinking vtp transparent X vtp server

Yes, that should work fine.

HTH

View solution in original post

Beginner

uplinking vtp transparent X vtp server

Thanks a lot.

Regards

Rosa

VIP Expert

uplinking vtp transparent X vtp server

Glad to help Rosa

Thanks for the rating!!

Beginner

uplinking vtp transparent X vtp server

It works fine!

CreatePlease to create content
Content for Community-Ad