cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
891
Views
5
Helpful
1
Replies

Using a Catalyst 6500 for "AV over IP"

jp.ward16
Level 1
Level 1

ow much more difficult is it to program the below features on a Catalyst 6500 when compared to programming using a SG300 for use in transmitting AV over IP?

 

I would like to know if this is possible, to use a Catalyst 6500 in place of a SG300-28PP. I have experience with the SG300 for this purpose, but not the 6500. A few years ago, I did have access to a Catalyst 6500 (circa 2011) and I discovered it used a CAT menu in place of the IOS most of use might be familiar with. 

 

I know all of these features are available on the SG300-28PP. 

 

How achievable / plausible are these steps on a C6500?

 

  • Jumbo Frames set to 9216,
  • Enabling IGMP Snooping,
  • Multicast forwarding or filtering,
  • IP address of IGMP Querier ( Can the C6500 be a IGMP Querier?)
  • Enabling a IGMP Querier,
  • IGMP snooping fast leave,
  • Dynamic multicast router port (is there an option for this on a C6500?)