07-27-2020 02:33 PM
!
version 12.4
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Router
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
!
!
!
!
!
!
!
!
!
!
!
spanning-tree mode pvst
!
!
!
!
!
!
interface FastEthernet0/0
ip address 192.170.1.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 192.180.1.1 255.255.255.0
duplex auto
speed auto
!
interface Vlan1
no ip address
shutdown
!
ip classless
!
ip flow-export version 9
!
!
!
!
!
!
!
!
line con 0
!
line aux 0
!
line vty 0 4
login
!
!
!
end
Solved! Go to Solution.
07-27-2020 08:42 PM
you made a typo (probably) in PC's default gateway. double check it\
Regards, ML
**Please Rate All Helpful Responses **
07-27-2020 02:54 PM
PC must have default gateway set to reach outside (remote) networks.
Also, check firewall settings (disable it for ping test)
Regards, ML
**Please Rate All Helpful Responses **
07-27-2020 03:40 PM
the default-gateway gateway is set to the same ip as fa0/0. is that the problem?
07-27-2020 03:44 PM - edited 07-27-2020 03:45 PM
no, that should be right one; PCs on fa0/0 should be on 192.170.1.0 /24 network with Ip of default gateway of e0/0; What is IP of PC?
as Georg suggested, see if router interfaces are UP/UP with command show ip int brief
is this virtual simulator like PT or real gear ?
Regards, ML
**Please Rate All Helpful Responses **
07-27-2020 06:44 PM
this is all virtual...packet tracer. the PC IP is 192.170.1.2.
07-27-2020 07:27 PM
07-27-2020 08:00 PM
07-27-2020 08:42 PM
you made a typo (probably) in PC's default gateway. double check it\
Regards, ML
**Please Rate All Helpful Responses **
07-28-2020 07:03 PM
thanks!
07-27-2020 03:27 PM
Hello,
is FastEthernet up/up ?
What is the output of:
show ip int brief
?
07-27-2020 03:42 PM
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 192.170.1.1 YES manual up up
FastEthernet0/1 192.180.1.1 YES manual up up
Vlan1 unassigned YES unset administratively down down
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: