cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
313
Views
0
Helpful
1
Replies

very strange log on a switch

network770
Beginner
Beginner

Anyone knows what that means, we are getting a lot of falformed and checksum errors and this is what the switch logs say:

Sep 15 23:46:36.096: TPLUS(000011A6)/0/READ: Would block while reading

*Sep 15 23:46:36.222: TPLUS(000011A6)/0/READ: socket event 1

*Sep 15 23:46:36.222: TPLUS(000011A6)/0/READ: read entire 12 header bytes (expect 16 bytes data)

*Sep 15 23:46:36.222: TPLUS(000011A6)/0/READ: socket event 1

*Sep 15 23:46:36.222: TPLUS(000011A6)/0/READ: read entire 28 bytes response

*Sep 15 23:46:36.222: TPLUS(000011A6)/0/52C099C: Processing the reply packet

*Sep 15 23:46:36.222: TPLUS: Received authen response status GET_PASSWORD (8)

*Sep 15 23:46:36.222: TPLUS: Queuing AAA Authentication request 4518 for processing

*Sep 15 23:46:36.222: TPLUS: processing authentication continue request id 4518

*Sep 15 23:46:36.222: TPLUS: Authentication continue packet generated for 4518

*Sep 15 23:46:36.222: TPLUS(000011A6)/0/WRITE/52C099C: Started 5 sec timeout

*Sep 15 23:46:36.222: TPLUS(000011A6)/0/WRITE: wrote entire 27 bytes request

*Sep 15 23:46:36.683: TPLUS(000011A6)/0/READ: socket event 1

*Sep 15 23:46:36.691: TPLUS(000011A6)/0/READ: read entire 12 header bytes (expect 6 bytes data)

*Sep 15 23:46:36.691: TPLUS(000011A6)/0/READ: socket event 1

*Sep 15 23:46:36.691: TPLUS(000011A6)/0/READ: read entire 18 bytes response

*Sep 15 23:46:36.691: TPLUS(000011A6)/0/52C099C: Processing the reply packet

*Sep 15 23:46:36.691: TPLUS: Received authen response status FAIL (3)

*Sep 15 23:46:41.204: TPLUS: Queuing AAA Authentication request 4518 for processing

*Sep 15 23:46:41.204: TPLUS: processing authentication start request id 4518

*Sep 15 23:46:41.213: TPLUS: Authentication start packet created for 4518(rshuster)

*Sep 15 23:46:41.213: TPLUS: Using server 10.20.4.25

*Sep 15 23:46:41.213: TPLUS(000011A6)/0/NB_WAIT/52C00F8: Started 5 sec timeout

*Sep 15 23:46:41.330: TPLUS(000011A6)/0/NB_WAIT: socket event 2

*Sep 15 23:46:41.330: TPLUS(000011A6)/0/NB_WAIT: wrote entire 43 bytes request

*Sep 15 23:46:41.330: TPLUS(000011A6)/0/READ: socket event 1

*Sep 15 23:46:41.330: TPLUS(000011A6)/0/READ: Would block while reading

*Sep 15 23:46:41.456: TPLUS(000011A6)/0/READ: socket event 1

*Sep 15 23:46:41.456: TPLUS(000011A6)/0/READ: read entire 12 header bytes (expect 16 bytes data)

*Sep 15 23:46:41.456: TPLUS(000011A6)/0/READ: socket event 1

*Sep 15 23:46:41.456: TPLUS(000011A6)/0/READ: read entire 28 bytes response

*Sep 15 23:46:41.456: TPLUS(000011A6)/0/52C00F8: Processing the reply packet

*Sep 15 23:46:41.456: TPLUS: Received authen response status GET_PASSWORD (8)

*Sep 15 23:46:41.456: TPLUS: Queuing AAA Authentication request 4518 for processing

*Sep 15 23:46:41.456: TPLUS: processing authentication continue request id 4518

*Sep 15 23:46:41.456: TPLUS: Authentication continue packet generated for 4518

*Sep 15 23:46:41.456: TPLUS(000011A6)/0/WRITE/52C00F8: Started 5 sec timeout

*Sep 15 23:46:41.456: TPLUS(000011A6)/0/WRITE: wrote entire 29 bytes request

*Sep 15 23:46:41.674: TPLUS(000011A6)/0/READ: socket event 1

*Sep 15 23:46:41.674: TPLUS(000011A6)/0/READ: read entire 12 header bytes (expect 6 bytes data)

*Sep 15 23:46:41.674: TPLUS(000011A6)/0/READ: socket event 1

*Sep 15 23:46:41.674: TPLUS(000011A6)/0/READ: read entire 18 bytes response

*Sep 15 23:46:41.674: TPLUS(000011A6)/0/52C00F8: Processing the reply packet

*Sep 15 23:46:41.674: TPLUS: Received authen response status PASS (2)

1 REPLY 1

dominic.caron
Contributor
Contributor

What's strange, you must have a debug tacacs running and I see one failed and one passed authentification.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: