06-08-2020 06:34 AM
I have two vlans (vlan 1 & 30) on a cisco C2960-L switch. I can PING from vlan 1 to vlan 30 but I can not PING any node on vlan 1 from vlan 30. Both nodes on each vlan can successfully connect to the internet.
My setup from ISP/WAN to the next hop and all network devices:
ISP>Fortigate 60D>Cisco 1921 router>Cisco C2960-L switch
Is my issue at the Fortinet firewall or the Cisco router?
06-08-2020 06:46 AM
Hi there,
As both VLANs can reach the internet it is safe to assume that the routing is correct. The one-way comms suggests an issue with an ACL. If both VLANs are routed on the 1921, please can you share the config with us.
cheers,
Seb.
06-08-2020 07:25 AM
I figured it out!
The Windows firewall was blocking ICMP. I found this out by disabling the Windows firewall on the node then running the PING command on another machine and got a successful PING.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide