02-05-2015 10:27 PM - edited 03-07-2019 10:32 PM
how to create VLAN in switches ?
Solved! Go to Solution.
02-05-2015 11:04 PM
Hi Anil,
Please provide me show version of switch.
Also you can refer the following link for the start up. Do let me know if any confusion.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/swvlan.html
02-05-2015 11:02 PM
Hi,
you can entered into the configuration mode and enter below command.
enable
conf t
vlan X (what ever vlan you wanted)
exit .
HTH
Regards,
VS.Suresh.
*Plz rate the usefull posts *
02-05-2015 11:04 PM
Hi Anil,
Please provide me show version of switch.
Also you can refer the following link for the start up. Do let me know if any confusion.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/swvlan.html
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: