cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
272
Views
0
Helpful
2
Replies

VLAN enabled switch

phong.vuong
Beginner
Beginner

can you recommend a VLAN enabled layer 3 cisco switch for small office of 20 servers + laptops/desktops + printers all together?

1 Accepted Solution

Accepted Solutions

Giuseppe Larosa
Hall of Fame Master Hall of Fame Master
Hall of Fame Master

Hello Phong,

you can go with the C3560 series with ip services images.

There are models with 24 ports and other with 48 ports.

see the datasheet

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5528/product_data_sheet09186a00801f3d7d.html

other choice can be a C3750 series

Hope to help

Giuseppe

View solution in original post

2 Replies 2

Giuseppe Larosa
Hall of Fame Master Hall of Fame Master
Hall of Fame Master

Hello Phong,

you can go with the C3560 series with ip services images.

There are models with 24 ports and other with 48 ports.

see the datasheet

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5528/product_data_sheet09186a00801f3d7d.html

other choice can be a C3750 series

Hope to help

Giuseppe

hi Phong,

Cisco 3560 or Cisco 3750 can be done. It depends on what you really want. If your network is alive. It may be hard to re-configure ip addresses of all servers. It should be the same. You then seperate vlan_server and vlan_user. Are you mapping all printers with thier name? If you're using ip addresses of printers then you're going to re-map them again(if vlan configured).

Toshi

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: