12-08-2008 10:20 PM - edited 03-06-2019 02:52 AM
can you recommend a VLAN enabled layer 3 cisco switch for small office of 20 servers + laptops/desktops + printers all together?
Solved! Go to Solution.
12-08-2008 10:42 PM
Hello Phong,
you can go with the C3560 series with ip services images.
There are models with 24 ports and other with 48 ports.
see the datasheet
other choice can be a C3750 series
Hope to help
Giuseppe
12-08-2008 10:42 PM
Hello Phong,
you can go with the C3560 series with ip services images.
There are models with 24 ports and other with 48 ports.
see the datasheet
other choice can be a C3750 series
Hope to help
Giuseppe
12-08-2008 10:45 PM
hi Phong,
Cisco 3560 or Cisco 3750 can be done. It depends on what you really want. If your network is alive. It may be hard to re-configure ip addresses of all servers. It should be the same. You then seperate vlan_server and vlan_user. Are you mapping all printers with thier name? If you're using ip addresses of printers then you're going to re-map them again(if vlan configured).
Toshi
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: