VLAN enabled switch

[phong.vuong]

can you recommend a VLAN enabled layer 3 cisco switch for small office of 20 servers + laptops/desktops + printers all together?

[Giuseppe Larosa · Accepted solution]

Hello Phong,

you can go with the C3560 series with ip services images.

There are models with 24 ports and other with 48 ports.

see the datasheet

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5528/product_data_sheet09186a00801f3d7d.html

other choice can be a C3750 series

Hope to help

Giuseppe

[Thotsaphon Lueangwattanaphong]

hi Phong,

Cisco 3560 or Cisco 3750 can be done. It depends on what you really want. If your network is alive. It may be hard to re-configure ip addresses of all servers. It should be the same. You then seperate vlan_server and vlan_user. Are you mapping all printers with thier name? If you're using ip addresses of printers then you're going to re-map them again(if vlan configured).

Toshi