08-17-2008 09:53 AM - edited 03-06-2019 12:51 AM
Hi,
I have 5 VLANS created on 4506
VLAN-100 [Server farm]
VLAN-200 [users farm]
VLAN-300 [ management vlans ]
VLAN-400 [ Admin vlan]
VLAN-500 [Unix Vlan ]
All VLAN should be accessible by VLAN 100 & VLAN 200 except VLAN 300.
Admin Vlan(400) should have communication will all VLANS...
Can someone advice steps to configure this....
08-17-2008 12:42 PM
Amin,
You need to could condsider:-
1) Private VLAN's
2) Community VLAN's
3) Public VLAN's
or just plain ACL's to permit/deny traffic from source VLAN to destination VLAN.
HTH>
08-17-2008 01:52 PM
Andrew,
With just Public VLAN can we fullfill the requirement, if you have performed similar then do give some more hints....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide