Hello,
I’m having an issue where wireless clients can’t access the wireless guest VLAN (25), SSID “Olivine”. Clients are able to connect to the wireless guest network but are unable to pull an IP from the DHCP server on that network. I have Ubiquiti U6-LR APs connected to Cisco 2960G switches. I'm using an ASA 5506 for interVLAN routing. I’m using the Cisco SPAN feature to monitor VLAN 25 with Wireshark. I’m also using Wireshark on a client, attempting to connect to the guest wireless. On the wireless client, I can see DHCP requests but no replies. On the SPAN, I don’t see any traffic at all on VLAN 25.
Ubiquiti equipment requires that trunks be configured with a native VLAN that has access to the Unifi controller in order to provide status and receive updates.
Note that wireless clients can connect to the inside VLAN (100/native), SSID "Ramsey", pull an IP, and utilize the network normally.
Below, I've attempted to provide all the relevant information:
Unifi Controller Version
Ubiquiti AP Firmware Status
Unifi VLAN Configuration
Unifi WiFi Configuration
Inside Cisco 2960G Switch Interface Configuration
Inside Cisco 2960G Switch Interface Status
Outside Cisco 2960G Switch Interface
Outside Cisco 2960G Switch Interface Status
Cisco ASA 5506 Interface Configuration (ASDM)
Cisco ASA 5506 Interface Configuration (CLI)
Cisco ASA 5506 DHCP Server Configuration
Network Diagram
Unifi Hyper-V VM Configuration