cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1408
Views
0
Helpful
4
Replies

VMPS feature on Cat 3650

DominikPecak
Level 6
Level 6

Hello,

 

VMPS is supported on Cat 3650? Command reference guide shows that IOS-XE 16.5.1a has commands related to VMPS, but switch is not accepting them.

 

Anyone have similar problem?

 

1 Accepted Solution

Accepted Solutions

Hi

Try using this Cisco Tool, select XE OS and platform

http://cfn.cloudapps.cisco.com/ITDIT/CFN/jsp/SearchBySoftware.jsp




>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<

View solution in original post

4 Replies 4

Hello

It could be that it isnt supported on that ios.

 

Can ypu post the output from:
show vmps


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

I cannot use that command - IOS-XE doesn't recognize it.

 

Command Reference, Cisco IOS XE Everest 16.5.1a for Catalyst 3650 Switches (https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3650/software/release/16-5/command_reference/b_165_3650_cr/b_165_3650_cr_chapter_010101.html) lists commands related to VMPS.

 

So, it is supported or not?

Hi

Try using this Cisco Tool, select XE OS and platform

http://cfn.cloudapps.cisco.com/ITDIT/CFN/jsp/SearchBySoftware.jsp




>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<

Feature Navigator shows that 3650 doesn't support VMPS :(. Now is time to migrate to ISE.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: