VPC: mixing SR and LW

[jjgrinwis]

Hi,

is it possible to use two different type's of SFP+'s(SR/LW) in a VPC connected to a VSS pair.

John

[dominic.caron · Accepted solution]

Yes

[jjgrinwis]

thanx

[dominic.caron · Accepted solution]

1/47  and 1/48 are in VPC port channel. (SR and LR SFP+)

Ethernet1/47

    transceiver is present

    type is 10Gbase-SR

    name is CISCO-SUMITOMO

    part number is SPP5100SR-C1

    revision is A

    serial number is SPC

    nominal bitrate is 10300 MBit/sec

    Link length supported for 50/125um OM2 fiber is 82 m

    Link length supported for 50/125um OM3 fiber is 300 m

    Link length supported for 62.5/125um fiber is 26 m

    cisco id is --

    cisco extended id number is 4

Ethernet1/48

    transceiver is present

    type is 10Gbase-LR

    name is CISCO-EXCELIGHT

    part number is SPP5101LR-C1

    revision is A

    serial number is ECL

    nominal bitrate is 10300 MBit/sec

    Link length supported for 9/125um fiber is 10 km

    cisco id is --

    cisco extended id number is 4