vrf-light in my Switch 3750

[mohamed louhab]

Hi ,

i try to configure vrf-light in my two Switch 3750E ,

Firstly i try with the vesion (12.2(35)SE5  C3750E-UNIVERSAL-M ) .

the vrf is supported but when i went to configure EIGRP per vrf i had the message following :

FED_B(config)#router eigrp 1

% Remove all VRFs before configuring EIGRP

secondary , i upgrade the version to ( 12.2(53)SE1 C3750E-UNIVERSALK9-M )

but  this version is not supported by vrf-light . I had the message following when i try to configure  vrf-light :

FED_B(config)#ip vrf USER

                  ^

% Invalid input detected at '^' marker.

FED_B(config)#ip v?

verify

what can i do to configure vrf-light and the EIGRP per vrf ( for the load balacing)

[Reza Sharifi]

Hi Mohamed,

VRF is defiantly supported on that image.  You many not have the correct license.  Get with SE  or sales guy to provide you with the key to enable it.

do a "sh licen" to see if you have the correct license.

Switch-B#sh license
Index 1 Feature: ipservices    
        Period left: 0  minute  0  second 
        License Type: Evaluation
        License State: Active, Not in Use, EULA accepted
        License Priority: Low
        License Count: Non-Counted

HTH

Reza

[mohamed louhab]

Hi Reza,

thanks for your reply , i will try that.

thanks